Is your home ready for an EV charger?
16A or 32A? Single or three-phase? Which cable? Is it safe? — we answer all of it with a simple wizard that gives a realistic Gulf home-charging estimate, always reminding you to use a licensed electrician.
AC charging basics
Home charging is always AC through a Type 2 connector — the Gulf standard. Your car has an onboard charger that caps how fast it accepts AC: usually 7 or 11 kW, some up to 22 kW. Even with a beefier circuit, the car never takes more than its onboard charger allows. DC fast charging (via CCS2) is a different thing entirely and isn't available at home.
Single-phase · 32A
Most people — daily city driving
Three-phase · 16A
Heavy drivers or two cars at home
Three-phase · 32A
*Most cars accept only 11 kW on AC
Home charger wizard
Try the wizard
Answer 4 quick questions for a realistic estimate — not formal electrical advice.
Informational — long runs affect cable size.
7 kW wall box (single-phase 32A)
A 32A circuit typically needs around 6mm² copper with a properly rated breaker and earthing — long runs may need a larger size. Final sizing is the licensed electrician's job.
We recommend a 7 kW wall box (single-phase 32A). You'll get about 6.8 kW delivered (~310 km overnight). Slow but safe — fine for light daily use; consider upgrading the circuit if you drive long distances. ⚠️ A licensed electrician must handle installation and inspection.
- In Kuwait's summer (≈50°C) some energy goes to battery cooling, so real km added may come in under the estimate.
Safety first
Use a licensed electrician for installation and inspection. These numbers are planning estimates only — not a substitute for a real assessment of your panel, earthing, and breaker.
Safety & installation
- Use a licensed electrician for installation and inspection — never wire a wall box yourself.
- Ensure a proper RCD/RCBO and solid earthing — essential for safe charging.
- In Kuwait heat (≈50°C) cable and breaker must handle sustained load — don't run at max continuously.
- Check your home's load capacity before upgrading — raising amperage may need utility approval.
Ready to install?
Connect with a certified home-charger installer in your area for assessment and safe installation.